Frame scaffolding is also called the multifunctional gate scaffolding, scaffold is widely used now in the market of mobile scaffold species, one of the Frame scaffold has many uses, besides it can be used to build the scaffold, also can be used to establish the platform construction, also can be used as a template support, the main component is a door frame, door scaffold poling, tie rod, pedal, connecting rods, etc.
The basic unit of the gantry scaffolding door frame, cross handle, degree of beams or button scaffolding structure. Follow the design requirements, the basic unit of the scaffold door undertakes assorted, installed at the location design degree of reinforcing bar, bracing, sweeping bar, sealing bar, bracket, base, and plate, etc., and set up according to the requirement even the rod connected to the building wall, scaffolding leasing scaffold system is a complete door.
Scaffold of mobile Frame scaffold degree of longitudinal bar and the vertical rod of each become friends point throughout right-angle fastener connection must be taken. Longitudinal bar extension of docking fastener must be taken through the connection, and from the interval of poling axis should not be greater than 1/3 of the span, the up and down or so between adjacent degree of longitudinal bar docking fastener shall be staggered a cross placed as much as possible.
Degree of horizontal pole placement: degree of longitudinal bar and the vertical rod of each become friends point must be set from another one and the degree of horizontal stud should not be greater than 150 ㎜ axis intervals. Degree of scaffold leasing center span of horizontal bar should be in accordance with the handle of scaffolding to be resettled. Degree of horizontal bar with rectangular buckle hooking on the degree of longitudinal bar. Single row scaffolding is end with a right-angle fastener hooking on the degree of longitudinal rod, the other end of the handle on the wall.